Trendnet TEG-082WS Betriebsanweisung PDF herunterladen (Seite 54)

TRENDnet User’s Guide TEG-082WS

Set Port Priority

Bridge > QoS > Port Priority

The Port Priority values are assigned to an untagged frame at ingress for

internal processing in the switch. This procedure explains how to change the

default mappings of port priorities to the User Priority. This is set at the switch

level. You cannot set this at the per-port level. To change the port priority

mappings, perform the following procedure.

For each port whose priority you want to change, select a priority (0-7) in the

User Priority column. Click Apply to save the settings.

Go Save Settings to Flash section to save the change on the flash to make

sure the change is permanent.

Set DSCP (Differentiated Services Code Point) Class Mapping settings

Bridge > QoS > DSCP

If you choose to use the DSCP tags in your Access Control policy configuration,

each DSCP value (0-63) that is relevant to your configuration needs to be

mapped to one of the four egress queues (Low, Medium, High, or Highest).

The default queue for all DSCP values is 0. To assign the queue mappings to

the DSCP values, perform the following procedure.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 122 123

Keine Kommentare

Trendnet TEG-082WS Betriebsanweisung Seite 54