Trendnet TEG-082WS Betriebsanweisung PDF herunterladen (Seite 43)

TRENDnet User’s Guide TEG-082WS

Multicast:

Click the drop-down list and select Enabled to enable

multicast storm control.

Threshold:

Enter the pps (packets per second) threshold.

Action:

Modifying settings in the row marked All, will apply

the settings to all ports. Click Apply to apply the

change.

Go Save Settings to Flash section to save the change on the flash to make

sure the change is permanent.

Set Ingress Rate Limiting

Bridge > Bandwidth Control > Ingress Rate Limiting

This section allows you to set the ingress (receive) rate for each switch port.

Ingress Rate Limiting Settings

Port:

The port number.

Bandwidth

Enter the ingress rate limit value.

Status

Click the drop-down list and select Enabled to enable

ingress rate limiting or select Disabled to disable ingress

rate limiting.

Action:

Modifying settings in the row marked All, will apply the

settings to all ports. Click Apply to apply the change.

Go Save Settings to Flash section to save the change on the flash to make

sure the change is permanent.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 122 123

Keine Kommentare

Trendnet TEG-082WS Betriebsanweisung Seite 43