Trendnet TEW-P1PG Bedienungsanleitung PDF herunterladen (Seite 14)

- 27 -

- AppleTalk: After selecting AppleTalk, the Port Name of the

print server will be displayed. Select the Port to which the

post-script printer is connected. Then, select the printer

model from the dialog box. Click Add Printer to complete

the Printer Port configuration. Select the Printer Port just

configured in the Print window. Click Print to print your

document.

- LPR Printers using IP: When you select LPR Printers using

IP Protocol, type the IP Address of the print server into the

LPR Printer’s Address field of the following window. In the

Queue Name field, type in the Port Name of the post-script

printer that is connected to the Print Server. Select the

printer model from the dialog box, and select the printer

model from the pull-down menu. Click Add to complete the

process. Close all Print Center windows and select the

Printer Port that was just selected. Then, click Print to print

the document.

Port Name of the connected printer.

- 28 -

For MAC OS 9 User

If you use MAC OS 9, you can use the AppleTalk network protocol

for network communications over standard Ethernet or Fast Ethernet

using the EtherTalk transport, or over a proprietary low-speed

LocalTalk transport. Your print server can be used for network

printing to PostScript printers. You can print from any MAC OS

computer connected to your Ethernet network, either directly using an

EtherTalk connection or indirectly through a LocalTalk-to-EtherTalk

router.

To set up the print server to be used for AppleTalk printing:

1. Please confirm that the AppleTalk protocol is enabled in your

Macintosh computer.

2. Change the IP Address on one of the computers within your

network to 192.168.0.x (where x is any number between 2-254).

3. Type 192.168.0.1 (the default IP Address) into the address field of

your browser.

4. Select the Network tab and scroll to the AppleTalk protocol

section.

5. If your AppleTalk network is divided into AppleTalk zones, you

have to specify which zone the Print Server should be in. You

should locate the print server in the same zone as most of the users

who will be using it. If your network is not divided into zones, it

should contain a single asterisk “*”.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Trendnet TEW-P1PG Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Trendnet TEW-P1PG