Trendnet TE100-P1P Bedienungsanleitung

- 9 - 2 HARDWARE INSTALLATION Networking Application The following diagram explains the application of your print server. Network Print Server

- 10 - Installing the Print Server Follow these steps for a trouble-free start of print server operations with your pocket-sized Print Server. 1. Con

- 11 - 3 USING THE UTILITIES This chapter describes the software utilities for the print server, including how to set up your print server with

- 12 - Auto-Run Installation Insert the Installation CD-ROM into your computer’s CD-ROM drive to initiate the Auto-Run program, and the menu screen w

- 13 - PS-Utility To avoid the conflict in your network, you can use PS-Utility to change the related settings of your print server (such as the IP a

- 14 - 3. The InstallShield Wizard starts to install the software, and the Progress bar indicates the installation is proceeding. 4. When completed,

- 15 - 2. The main screen will appear as below, and it starts to search the connected print server within the network. Component Features: 1. Dev

- 16 - - Change IP Address: Click this button to bring up the following dialog box, allowing you to change the IP Address. In this dialog box, you

- 17 - PS Wizard Note: The PS Wizard doesn’t support Windows 95/98/ME. The user can refer chapter 5 “Printing in Windows 95/98/ME” to set up for prin

- 18 - 2. In the following window, select one printer in the Printer List to set up port connection, and then click Next >. 3. Select one print

- 1 - TABLE OF CONTENTS ABOUT THIS GUIDE...3 INTRODUCTION...

- 19 - 4. The configuration is completed, click Reboot and then Yes to restart the system. After rebooting, PS Wizard will help you to automatic

- 20 - 4 WEB CONFIGURATION You can access and manage the Print Server through: 1) the enclosed software PS-Utility, and 2) a web browser. This chapt

- 21 - Home The Management Screen of the Configuration Utility The Home screen displays the basic information of the print server. As shown above,

- 22 - Setup Wizard The “Setup Wizard” will hlep you to change all the configurations step by step. Please follow below steps to finish it System In

- 23 - IP Address This option allows you to set the IP address manually or automatically. When you choose Manually Assign, you should enter the rel

- 24 - Microsoft Network Enter the name of the Workgroup that you want the print server associated with in this field.

- 25 - Second HTTP Port This field allows settings to open a second port for the remote printing and IPP printing function. This will permit users t

- 26 - Save to Print Server Please double check all the configurations and click “Yes” to save the settings. The Setup Wizard has been completed.

- 27 - Change IP Address This feature is helping you to change IP address only. If you have run the Setup Wizard already, you may skip this proced

- 28 - Printer Information “Printer Information” will display all printer information such as Manufacturer, Model Number, Command Set and Status.

- 2 - ADDING LPR PRINTER PORTS... 35 PRINTING FROM WINDOWS 95/98/ME...

- 29 - Factory Reset Please click Yes to restore the factory default setting.

- 30 - Firmware Upgrade The firmware can be easily upgrade through “Firmware Upgrade” feature. Click Browse to get the firmware file, and then cli

- 31 - About This screen displays the information of the print server.

- 32 - 5 PRINTING IN WINDOWS 95/98/ME The Print Server can provide print services to TCP/IP networks using the lpr/lpd network printing protocol.

- 33 - Installing the LPR for TCP/IP Printing Client Before your Windows 95/98/Me workstation can print using the LPR protocol, you will need to inst

- 34 - 7. Insert the Print Server installation CD in your computer’s CD-ROM, enter the proper pathname (for example , D:\ lpr), and click OK. 8. Selec

- 35 - Adding LPR Printer Ports Once you have installed the client, and have enabled TCP/IP printing for the Print Servers, then you need to add a pr

- 36 - 4. Click the Add Port... button to add a new lpd-accessible printer port. 5. Enter the IP address of the Print Server and the name of the print

- 37 - Printing from Windows 95/98/Me After you have added the necessary printer ports, you can add a printer device for printing to the port. To

- 38 - 4. Enter the name of the port, as displayed in the LPR for TCP/IP Printing Port List. Alternatively, you can click Browse... and locate

- 3 - ABOUT THIS GUIDE This manual provides instructions and illustrations on how to use your 10/100Mbps Parallel Print Server, including: z Chap

- 39 - Press OK when you have located the proper printer port. Click Next > to continue to the next step. 5. At this point Windows will ask yo

- 40 - Setting TCP/IP Printing Settings The lpr client’s Properties dialog allows you to change several of the client’s settings. To change these s

- 41 - The parameters are as follows: ♦ Communication Timeout Determines how long, in seconds, the system will wait before determining that it

- 42 - 6 PRINTING IN WINDOWS 2000/XP Setting Up Windows 2000 TCP/IP Printing Following is the correct procedure for setting up TCP/IP LPR printing u

- 43 - Create a new “Standard TCP/IP Port” Click “Next”

- 44 - Input the IP Address of the Print Server, and the Port name of the Port that will be printed to, then click “Next”. Hint: You can get the Port

- 45 - Select “LPR”, and put the Port name in the field labeled “Queue Name”. Then Click “OK”. Click “Next”.

- 46 - Click “Finish” The Printer Install Wizard will now prompt for drivers. Select the correct Brand and Model, or click “Have Disk”, to provide

- 47 - k “Next”. Select a “Printer Name”.

- 48 - Sharing can be enabled here. Also, a Test Page can be printed to confirm proper configuration.

- 4 - 1 INTRODUCTION Congratulations on purchasing your 10/100Mbps Parallel Print Server, the easiest and fastest way to deploy printers on your ne

- 49 - When the Test Page has been printed, click “Finish” to complete the installation.

- 50 - Setting Up Windows XP TCP/IP Printing Following is the correct procedure for setting up TCP/IP LPR printing under Windows XP. Click Start >

- 51 - Select “Local Printer” Create a new “Standard TCP/IP Port”

- 52 - Click “Next” Input the IP Address of the Print Server, and the Port name of the Port that will be printed to, then click “Next”. Hint: You

- 53 - Select “Custom”, and click “Settings”. Select “LPR”, and put the Port name in the field labeled “Queue Name”. Then Click “OK”.

- 54 - Click “Next”. Click “Finish”

- 55 - The Printer Install Wizard will now prompt for drivers. Select the correct Make and Model, or click “Have Disk”, to provide the Manufacturer’s

- 56 - A Test Page can be printed to confirm proper configuration. When the test page has been printed, click “Finish” to complete the installati

- 57 - 7 PRINTING IN MAC OS Rendezvous Uses in MAC OS 10.2 The latest version of MAC OS provides a new feature that is called Rendezvous. Rende

- 58 - 1. Launch Print Center. Press and hold the Option key, click the Add button. 2. Select Rendezvous from the pop-up menu. 3. When

- 5 - Package Contents Unpack the package and check all the items carefully, and inspect that you have the following: ♦ One TE100-P1P ♦ One AC Po

- 59 - 4. Select the desired printer, and the following pop-up menu displays the printer’s manufacturer. Select Generic. 5. The printer

Limited Warranty TRENDware warrants its products against defects in material and workmanship, under normal use and service, for the following lengt

ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZARD. LIMITATION

- 6 - General Features ♦ Compliant with Bi-directional 36-pin parallel port ♦ Equipped 10/100 auto-MDIX Fast Ethernet LAN port ♦ Multi protocol sup

- 7 - Product View This section describes the externally visible features of the print server. Front View Rear View Parallel Prin

- 8 - * There are three green LED indicators on the rear panel: LEDs Description Power Steady light confirms that the Print Server is powered on. LPT