Trendnet TEW-624UB Bedienungsanleitung

5 4) Plug the 300Mbps Wireless N USB 2.0 Adapter into an available USB slot on your computer Wireless Utility Setting The user can configure the wire

6 TxRate: Shows the current data rate used for transmitting. Channel: Shows the current channel for communication. Link Quality: Shows the link qualit

7 ●Ad-Hoc – to establish point-to-point wireless communication directly with other wireless client devices. AdHoc Band: There are three available sele

8 Auth Mode: The following options are available: Open System, Shared Key, Auto, WPA/WPA2 and WPA-PSK/WPA2-PSK. Select Open System, Shared Key or A

9 If WPA-PSK/WPA2-PSK is selected, click the “configuration” button. The below window appears. Please enter a WPA Passphrase. IV. Site Survey T

10 Available Network – displays the wireless networks (wireless clients and access points) that are within range. Select any one of the wireless ne

11 Add: Adds a profile. The following screen will appear. The user can enter the necessary information required for accessing Access Points or Wireles

12 TECHNICAL SPECIFICATIONS Hardware Interface USB 2.0 Compliant Standards IEEE 802.11n draft v1.0, IEEE 802.11b and IEEE 802.11g Antenna Integrated

Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following length

i Regulatory notes and statements Wireless LAN, Health and Authorization for use Radio frequency electromagnetic energy is emitted from Wireless LAN d

ii frequency exposure limits. Nevertheless, this device shall be used in such a manner that the potential for human contact during normal operation is

iii The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be loc

iv TABLE OF CONTENT Introduction ... 1 Overview of this Use

1 INTRODUCTION Congratulations on your purchase of this 300Mbps Wireless N USB 2.0 Adapter. This manual contains detailed instructions regarding the o

2 UNPACKING AND SETUP This section provides unpacking and setup information for the 300Mbps Wireless N USB 2.0 Adapter. Unpacking The box should conta

3 IDENTIFYING EXTERNAL COMPONENTS LED When the LED is blinking, the WLAN Adapter is transmitting or receiving data on the Wireless Ethernet network.

4 SOFTWARE INSTALLATION This section describes how to install the driver and utility for the 300Mbps Wireless N USB 2.0 Adapter. Windows Based Utility