Trendnet TEW-423PI Bedienungsanleitung PDF herunterladen (Seite 11)

Advanced

The Advanced settings help you to control the PCI Adapter to adjust

with wireless devices in certain environment.

¾ Transmit Rate:

You can choose one of the transmission rates as follows, 54Mbps,

48Mbps, 36Mbps, 24Mbps, 22Mbps, 18Mbps, 12Mbps, 11Mbps,

9Mbps, 6Mbps, 5.5Mbps, 2Mbps, 1Mbps, Fully Automatic and Turbo

Mode.

In some specific wireless devices, the transmit rate can define up to

72Mbps for 802.11g, select the Turbo Mode function to enhance the

transfer rate of the wireless connection.

The Fully Automatic and Turbo Mode will automatically detect the

suitable linking transfer rate and auto fall back when the signal is not

too strong to transmit data.

¾ Power Saving:

To set your Wireless PCI Adapter as power saving mode, select “Off”,

“Normal” or “Maximum”.

¾ Transmit Power:

By selecting the Transmit Power, you can select the Radio Frequency

output power from Minimum, 12.5%, 25%, 50%,100% or Auto.

¾ Preamble Type:

The usage of the preamble is to limit the packet size of the data to

transmit. It is recommended to choose the short preamble when the

link quality is bad, it is to prevent the wasting time of resending a long

packet that is lost. The Default is Auto which access short and long

preamble.

¾ Authentication Type:

Open System: with the same WEP key between the stations, the

stations don’t need to be authenticated, and this algorithm was set to

default.

Shared Key: with the same WEP key between the stations in this

Authentication algorithm, this type will use packets with encryption

by transferring a challenge text which will be acknowledge by both

side of the stations. In order to choose which authentication

algorithm

will be used, you must know which one the station supports this

algorithm first.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17 18

Keine Kommentare

Trendnet TEW-423PI Bedienungsanleitung Seite 11