Trendnet TV-IP600 Bedienungsanleitung

TV-IP600/W Wireless Network Camera 7Rear Panel Components The power connection to the camera when fitted with the Infrared lens is split between the

TV-IP600/W Wireless Network Camera 97Q: Why does the Camera work locally but not externally? A1: The Camera’s connection might be being blocked

TV-IP600/W Wireless Network Camera 98D. Time Zone Table Time Zone Location/Description (GMT - 12:00) Enjwetok, Kwajalein (GMT - 11:00) Midway Isla

TV-IP600/W Wireless Network Camera 99Time Zone Location/Description (GMT + 01:00) Brussels, Copenhagen, Madrid, Paris, Vilnius (GMT + 01:00) Saraje

TV-IP600/W Wireless Network Camera 100Time Zone Location/Description (GMT + 09:00) Seoul (GMT + 09:00) Yakutsk (GMT + 09:30) Adelaide (GMT + 09:30)

TV-IP600/W Wireless Network Camera 101 E. Adjusting Internet Camera Focus To adjust the focus of the lens, you need to turn the lens slowly in eithe

TV-IP600/W Wireless Network Camera 102G. Technical Specifications CameraGeneral Sensor:1/4”colorCMOSSOCimagesensorResolution:640x480pi

TV-IP600/W Wireless Network Camera 103Netscape,andGoogleChromeToRunSoftware WindowsXP,VistaIPViewPro2.0 Channel:supportsupto32camer

TV-IP600/W Wireless Network Camera 104Security 64/128‐bitWEP,WPA‐PSK,WPA2‐PSKOutputPower 802.11b:16dBm(typical)802.11g:12dBm(typical)R

TV-IP600/W Wireless Network Camera 105Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use

TV-IP600/W Wireless Network Camera 106MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER HAZ

TV-IP600/W Wireless Network Camera 82 Installing the Camera The camera is intended for indoor use. The camera, the power adapter and power source sh

TV-IP600/W Wireless Network Camera 107

TV-IP600/W Wireless Network Camera 9Connect Ethernet Cable To connect the camera to your network, connect a Category 5 or better Ethernet cable to t

TV-IP600/W Wireless Network Camera 10Reset Camera A manual reset can be conducted by following the procedure below. The reset button is located on t

TV-IP600/W Wireless Network Camera 113 Security To ensure the highest level of security and prevent unauthorized usage of the Camera, the Administra

TV-IP600/W Wireless Network Camera 124 Application The TV-IP600 / TV-IP600W camera can be applied in a wide range of applications, including: • Mon

TV-IP600/W Wireless Network Camera 135 Using the Utility This chapter describes the software utilities for the IP Camera, including how to set up yo

TV-IP600/W Wireless Network Camera 142. The next window asks you whether you want to accept the License Agreement or not. • If you agree with the

TV-IP600/W Wireless Network Camera 155. The software will start to install. The following window appears, showing the progress of the installation:

TV-IP600/W Wireless Network Camera 16Launching the SetupWizard To launch the SetupWizard, click the SetupWizard icon on your desktop or go to Start

iiCONTENTS ABOUT THIS USER’S GUIDE ... 1INTRODUCTION ...

TV-IP600/W Wireless Network Camera 17SetupWizard- Select Your Camera The following screen appears showing the cameras that have been found on your n

TV-IP600/W Wireless Network Camera 18SetupWizard- Authentication On the following screen type in the ID and Password that you will use to configurin

TV-IP600/W Wireless Network Camera 19SetupWizard- Change Password The following screen allows you to change the default admin password: Carry out

TV-IP600/W Wireless Network Camera 20SetupWizard- Select a Connection Option The following window allows you to specify the connection method used

TV-IP600/W Wireless Network Camera 21SetupWizard – Select a Connection Option - PPPoE If your connection method is PPPoE, click the PPPoE radio butt

TV-IP600/W Wireless Network Camera 22SetupWizard- Select a Connection Option- DHCP If your connection method is DHCP, click the DHCP radio button an

TV-IP600/W Wireless Network Camera 23SetupWizard- Select a Connection Option- Fixed IP If your connection method is Fixed IP, click the Fixed IP rad

TV-IP600/W Wireless Network Camera 24SetupWizard- Setup Wireless (For TV-IP600W only) After choosing your connection method, the following window ap

TV-IP600/W Wireless Network Camera 25SetupWizard- Setup Wireless (For TV-IP600W only) If you selected the option to use a wireless connection to con

TV-IP600/W Wireless Network Camera 26SetupWizard- Other Settings The following window allows you to configure additional camera settings:  Type a

iiiReset ... 60

TV-IP600/W Wireless Network Camera 27SetupWizard- Setting Up The Camera The following window appears, summarizing the network settings of your camer

TV-IP600/W Wireless Network Camera 28SetupWizard- Complete After the camera has restarted, the following window will appear:  Click the hyper-lin

TV-IP600/W Wireless Network Camera 296 Using the Camera Web Manager The camera is easy to use and manage. Use a normal web browser to access the cam

TV-IP600/W Wireless Network Camera 30Login To access the web manager directly from a computer or on a network without a DHCP server running, use the

TV-IP600/W Wireless Network Camera 31Administration Click the ADMINISTRATION link to view the menus in the Administration Menu directory. The follo

TV-IP600/W Wireless Network Camera 32Status The following menus are available in the Status: System, Video, Wireless (only for TV-IP600W camera), Ne

TV-IP600/W Wireless Network Camera 33Video Status Click the Video link from the column on the left hand-side to display the Video Status of your cam

TV-IP600/W Wireless Network Camera 34Wireless Status (for TV-IP600W only) Click the Wireless link from the column on the left hand-side to display t

TV-IP600/W Wireless Network Camera 35Network Status Click the Network link from the column on the left hand-side to display the Network Status of yo

TV-IP600/W Wireless Network Camera 36Active Users Click the Active Users link from the column on the left hand-side to display the Active Users curr

TV-IP600/W Wireless Network Camera 1About This User’s Guide This User Guide provides instructions on how to install the TV-IP600/W Wireless Network

TV-IP600/W Wireless Network Camera 37Configuration The following menus are available in the Configuration directory: System, Video, Wireless (only f

TV-IP600/W Wireless Network Camera 38The default setting for the Admin ID is “admin”. The maximum length allowed for the Admin ID is 12 (printable A

TV-IP600/W Wireless Network Camera 39Video Settings Click the Video link from the column on the left hand-side to configure the image configuration

TV-IP600/W Wireless Network Camera 40• Saturation Control: Use the buttons to adjust the saturation level. The default setting is 64. • Light Freq

TV-IP600/W Wireless Network Camera 41Wireless Setup (for TV-IP600W only) The TV-IP600W Wireless Network Camera supports normal wireless LAN function

TV-IP600/W Wireless Network Camera 42Wireless Interface Use the Wireless Interface menu to configure the Camera’s wireless interface. Wireless Inte

TV-IP600/W Wireless Network Camera 43Encryption Use the Encryption menu to configure the Camera’s Encryption settings. Wireless Encryption menu •

TV-IP600/W Wireless Network Camera 44• WEP Key Format: If enabling WEP Encryption you should decide whether to use an ASCII or HEX format for your

TV-IP600/W Wireless Network Camera 45Advanced Setting Use the Advanced Setting menu to configure the Camera’s advanced settings. Advanced Setting m

TV-IP600/W Wireless Network Camera 46Network Settings Click the Network Setup link to view menus for IP network settings, PPPoE configuration, DDNS,

TV-IP600/W Wireless Network Camera 21 Introduction Thank you for purchasing the TV-IP600/TV-IP600W Pan/Tilt (Wireless) Internet Camera, a standalone

TV-IP600/W Wireless Network Camera 47TCP/IP • IP Address Mode: Click a radio button to define the IP Address Mode: Fixed IP You can select this op

TV-IP600/W Wireless Network Camera 48User Use the User menus to add, edit and delete users for your camera. User menu User Access Control The Admi

TV-IP600/W Wireless Network Camera 49Define Users Use this section to add new users and define the privileges of the new user. Define Users menu

TV-IP600/W Wireless Network Camera 50Date/Time Use the Date/Time menu to set the Camera’s time settings Date/Time menu Date/Time Setting Use the

TV-IP600/W Wireless Network Camera 51Upload Use the Upload menu to setup the configuration for the FTP Server, schedule FTP Server Uploads and conf

TV-IP600/W Wireless Network Camera 52FTP Server Use this section to configure the basic settings of your FTP server. FTP Server menu • Host Addre

TV-IP600/W Wireless Network Camera 53Time Schedule Use this section to enable images to be uploaded to an FTP Server at regular intervals. Time Sc

TV-IP600/W Wireless Network Camera 54• File: Since you may not upload only one image to the FTP server, you can use this field to specify the flin

TV-IP600/W Wireless Network Camera 55E-mail Use the E-mail menu to setup the configuration of the E-mail account, time schedule and manual operatio

TV-IP600/W Wireless Network Camera 56E-mail Account Use this section to configure your E-mail Account configuration. E-mail Account settings • S

TV-IP600/W Wireless Network Camera 3Unpacking the Package Open the shipping carton and carefully remove all items. Check that you have the following

TV-IP600/W Wireless Network Camera 57Time Schedule Use this section to section to enable images to be e-mailed to the specified e-mail account at re

TV-IP600/W Wireless Network Camera 58Manual Operation Use this section to E-mail Manual Operation settings • Enable e-mail image to e-mail accoun

TV-IP600/W Wireless Network Camera 59Tools The following menus are available in the Tools directory: FTP Server Test, E-mail Test, Reset, Factory Re

TV-IP600/W Wireless Network Camera 60Reset This option allows you to restart your Camera. Reset menu Reset Device Clicking the Yes button will rest

TV-IP600/W Wireless Network Camera 61Firmware Upgrade When new firmware is available, you can upgrade it through this window. To upgrade the camera

TV-IP600/W Wireless Network Camera 62Backup The Backup window allows you to Backup or Restore the Camera settings. Backup Settings menu Backup De

TV-IP600/W Wireless Network Camera 63Help The Help window displays help topics for the Camera. About The About option displays the Camera’s model na

TV-IP600/W Wireless Network Camera 64Viewing Video The TV-IP600W allows you to view video images using ActiveX or Java in your web browser. Click Vi

TV-IP600/W Wireless Network Camera 65 Uploading/E-mailing Video In the View Video – Active X or Java windows, it is possible to turn the Upload Imag

TV-IP600/W Wireless Network Camera 66Controlling the Camera You can control the Camera’s viewing angle using the control buttons on the left-hand si

TV-IP600/W Wireless Network Camera 4System Requirements Networking • Local Area Network: 10Base-T Ethernet or 100Base-TX Fast Ethernet • Wireless

TV-IP600/W Wireless Network Camera 67Storing Positions The Camera allows you to store positions that you want to monitor regularly, allowing you to

TV-IP600/W Wireless Network Camera 687 IPView Pro 2.0 This section describes the how to setup a camera using the IPView Pro 2.0 camera monitoring so

TV-IP600/W Wireless Network Camera 69Add a camera for monitoring The Add camera menu is presented the first time the IPView Pro 2.0 software is laun

TV-IP600/W Wireless Network Camera 70 If the camera does not appear listed, click the Input the location of camera tab above the list to view a new

TV-IP600/W Wireless Network Camera 71IPView Pro 2.0 User Interface Below is a general description of the user interface. NO. Item Description 1 L

TV-IP600/W Wireless Network Camera 72Display Controls The primary display and IPView Pro 2.0 control icons are described in detail below. When there

TV-IP600/W Wireless Network Camera 73Live video display controls Use the video display controls to change the view of the live video display. This i

TV-IP600/W Wireless Network Camera 74Camera configuration with IPView Pro 2.0 Access the camera configuration menus by clicking on the gear icon at

TV-IP600/W Wireless Network Camera 75 2. Select the camera to add from the list, enter the administrator’s user name (ID:) and password, a preview

TV-IP600/W Wireless Network Camera 76Schedule Recording with IPView Pro 2.0 Use the Camera Settings menu to create schedules for recording and apply

TV-IP600/W Wireless Network Camera 5Default Settings Use the default settings to access the web-based management software and live video display. De

TV-IP600/W Wireless Network Camera 77 Setup Motion Detection and Digital Input with IPView Pro 2.0 The Camera Settings menus include Motion Detectio

TV-IP600/W Wireless Network Camera 78IPView Pro 2.0 Recording Options The Recording Options configured in the IPView Pro 2.0 help to conserve and m

TV-IP600/W Wireless Network Camera 79IPView Pro 2.0 Miscellaneous Options The Other Options available for configuration include Proxy server setup,

TV-IP600/W Wireless Network Camera 808 Playing Video Files on a Computer IPCamPlayer software is installed on the monitoring station or administrato

TV-IP600/W Wireless Network Camera 81Load Saved Video Files Each camera has a file created automatically for storing video files. These files are no

TV-IP600/W Wireless Network Camera 82 To view recorded video files in the IPCamPlayer, it is first necessary to locate and select the files to be vi

TV-IP600/W Wireless Network Camera 83ffdshow The ffdshow software is used for audio and video encoding and decoding, especially for MPEG-4 formats.

TV-IP600/W Wireless Network Camera 84 3. The InstallShield Wizard will appear, click Next in the welcome screen. 4. Accept the default locatio

TV-IP600/W Wireless Network Camera 85 5. Click to check the components that will be installed. For IPCamPlayer it is only necessary to use the def

TV-IP600/W Wireless Network Camera 867. Click to check the additional tasks that will be installed. For IPCamPlayer it is only necessary to use the

TV-IP600/W Wireless Network Camera 6Camera Hardware Components This section provides information about the Camera’s hardware components: Front Panel

TV-IP600/W Wireless Network Camera 879. Click to check the audio applications that use ffdshow. For IPCamPlayer it is only necessary to use the def

TV-IP600/W Wireless Network Camera 8811. Review the information and click Install if satisfied that it is correct to install the necessary codecs. T

TV-IP600/W Wireless Network Camera 899 Appendix A. Frequently Asked Questions Internet Camera Features Q: What is an Internet Camera? A: An Inte

TV-IP600/W Wireless Network Camera 90Internet Camera Installation Q: Can the Internet Camera be used outdoors? A: The Camera is not water-proof

TV-IP600/W Wireless Network Camera 91B. PING your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP address i

TV-IP600/W Wireless Network Camera 924. Type ping x.x.x.x, where x.x.x.x is the IP address of the Camera, as shown below: Reply messages indicate

TV-IP600/W Wireless Network Camera 93C. Troubleshooting Q: I cannot access the Camera from a web browser? A1: The possible cause might by that t

TV-IP600/W Wireless Network Camera 94A2.2: Click the Network Connections icon as shown below:

TV-IP600/W Wireless Network Camera 95A2.3: Double-click the network adaptor that is connected to your Camera: Select TCP/IP from the “Network“ di

TV-IP600/W Wireless Network Camera 96Click the Properities button. Double-click the Internet Protocol (TCP/IP) item and check that the first 3 byt